|
|
Express 6 / Specifications
GENERAL SPECIFICATIONS
|
| Standalone Operation |
Does not require a dedicated PC in order to operate -- The Express 6 video
server is a true standalone device that plugs directly into a network or modem. |
| Six Video Inputs |
One Express 6 can stream video and images from up to six video cameras.
This is 50% more than most competitors. |
| Cost Effective |
The Express 6 "per video port" cost is less than $140. Competing video
servers come with only four ports and cost $250-$400 per port. The Express 6 has higher
image quality than competing video servers at around half the cost. |
| IP-Addressable |
Video streams and configuration menus can be viewed from anywhere by simply
entering the IP address in a web browser. |
| Password-Protected |
Configuration menus and video streams are username/password protected to
prevent unauthorized access. |
| Browser-Based |
No special software or downloads are needed to access the Express 6.
Any java-enabled web browser can be used, including browsers on Windows, MacOS and UNIX/Linux.
|
| Triggered Smart Capture |
A sequence of images can be uploaded or e-mailed based on a triggered event
(alarm system, motion detector, door sensor, etc.), including both pre- and post-alarm images.
|
| Built-In FTP Client |
The Express 6 can be programmed to upload images to your web server based on
the schedule you set. Each video input's upload schedule is independent. |
| Power Injected Cable |
Optional power/video cables are available. This is the key to easy
installation -- one cable carries both power and video which means a wall outlet
is not needed near the cameras and only one cable needs to run to each camera. |
| Date/Time |
Auto network time synchronization or manual time set. Time/Date and custom
text is printed on live image, flexible font color and positioning. |
| Complete Solution |
Express 6 "Security Camera System in a Box" bundles are available,
included are the video server, cameras, mounts, cables, power supplies and easy-to-follow
instructions. |
| Warranty |
Limited 1-Year Warranty, Parts & Labor |
TECHNICAL SPECIFICATIONS
|
| Image Compression |
Industry Standard JPEG & MPEG-1 |
| Frame Rate |
Up to JPEG 10 FPS, MPEG 30 FPS |
| Resolution |
NTSC: 702x480, 352x240, 176x120
PAL: 704x576, 352x288, 172x144 |
| Video Inputs |
6 x BNC composite video signals w/75ohm termination (selectable), NTSC,
PAL or SECAM, RCA type adapters available, four of six inputs can be combined to allow
2 x S-VIDEO sources |
| Video Decoder |
Adaptive 2/4-line comb filter for two dimensional chrominance/luminance
separation resulting in increased luminance and chrominance bandwidth for all PAL and NTSC
standards as well as reduced cross color and cross luminance artifacts |
| Pre/Post Alarm Buffer |
Up to 1.8MB available for pre- and post-alarm buffer image storage (or 180
10KB images) |
| Network Connection |
1 x 10-baseT Ethernet |
| CPU |
Motorola Coldfire 5407, 162MHz |
| InternalOperating System |
uClinux |
| Network Protocols Supported |
TCP/IP, HTTP, FTP, DHCP, ARP, PING, TELNET, DAYTIME, NTP, SMB, NFS |
| Serial Connection |
2 x RS-232 Ports, DB9, up to 115.2Kb/sec |
| I/O Connectors |
4 x Digital Alarm Inputs
or
4 x 5V Swing Output Pins
1 x Fully Isolated Relay, 2A@5V or 0.5A@28VDC
Output is 5VDC@50mA |
| Memory |
16MB DRAM, 2MB Flash Memory |
| Security |
Separate password-protected user accounts for administering the server and
viewing the images, additional user accounts can be added |
| Operating Temperature |
-4°F to +120°F (-20°C - +49°C) |
| Dimensions |
9.1" wide (231 mm) x 1.8" high (46 mm) x 6.65" deep (168.5 mm) |
| EMI Approval |
FCC Class A, CE (EN55024/1998, EN55022/1998) |
| Power Requirements |
8VDC - 15VDC (500mA@12V) |
|
|
