Modular Power Raceway System
 
 

Design And Build Your Own Custom Power Strip Using Off-The-Shelf Components

Need a custom power strip fast? With our new MPR Series, you can design and build a custom power distribution system to your specifications! As easy to configure in the field as it is in the shop, our new modular power system provides the broadest selection of circuit and control options, and utilizes a proprietary pre-terminated interconnect system that snaps together in a fraction of the time it takes to custom hard wire other raceway products.

The MPR series is comprised of power modules, raceways, interconnect cables, and a sequencing controller. The concept is to mix and match power modules appropriate for your application.

You Design It - simply select the number of circuits and amperage/outlets required, and choose the appropriate modules for the job. Decide whether to use our flexible sequencing control system (USC-6R) or use any control system that provides 12 volt DC or contact closure outputs.

You Build It - use our pre-terminated cables to connect modules (no hardwiring required!), and install the modules in the appropriate raceway.

Easy Installation - raceways install quickly into racks utilizing our unique “quick-clip” mounting method.

How to Order
A fully configured raceway consists of at least four components:
  • one MPR raceway - accepts 3, 6, or 9 MPR modules
  • one or more MPR modules - provides 1 duplex outlet per module
  • J series AC jumpers - interconnects same-circuit modules
  • at least one T series tail - connects raceway circuit to main power
For example:
If you require a raceway that contains 4 remote sequenced 20 amp isolated ground outlets, 8 remote sequenced 15 amp outlets on a second circuit, and you need local switch sequence control, you will need to order:

  • [A] (1) MPR-6 raceway
  • [B] (2) RLM-20IG 20 amp modules
  • [C] (4) RLM-15 15 amp modules
  • [D] (1) J-12X6 jumper (sold in packs of 6 - 4 req'd.)
  • [E] (1) T-24X6 connector with tails (sold in packs of 6 - 1 req'd.)
  • [F] (1) T-80X6 connector with tails (sold in packs of 6 - 1 req'd.)
for more info on raceways, click HERE

Power Modules  

Switchable power modules allow quick and easy shop or field wiring of vertical power raceways. An extensive selection of both 15 amp and 20 amp modules allow the installer to configure each raceway to fit the application, with single or multiple circuits and a choice of control options. All modules utilize a unique genderless 30 amp coupler to daisy-chain AC power to other modules on the same circuit. Modules fit our MPR Series raceways, are manufactured from galvanized steel and feature a durable min-spangle finish.
Stand-Alone Part #
Part #
Amperage
Control
Status
RLM-15-1C
RLM-15
15
remote 12 volt DC, dry closure, local switch
LED and dry contact
RLM-20-1C
RLM-20
20
remote 12 volt DC, dry closure, local switch
LED and dry contact
RLM-20IG
20/ isolated ground
remote 12 volt DC, dry closure, local switch
LED and dry contact

Stand-Alone Part #
Part #
Amperage
Control
Status
RM-15-1C
RM-15
15
remote 12 volt DC
LED and dry contact
RM-20-1C
RM-20
20
remote 12 volt DC
LED and dry contact
RM-20IG
20/ isolated ground
remote 12 volt DC
LED and dry contact

Stand-Alone Part #
Part #
Amperage
Control
Status
R-15-1C
R-15
15
remote 12 volt DC
none
R-20-1C
R-20
20
remote 12 volt DC
none
R-20IG
20/ isolated ground
remote 12 volt DC
none

Stand-Alone Part #
Part #
Amperage
Control
Status
M-15-1C
M-15
15
always on
none
M-20-1C
M-20
20
always on
none
M-20IG
20/ isolated ground
always on
none
 
Stand-Alone MPR Power Modules
  Stand-Alone MPR System Modules now available. Featuring built-in cable management, the modules mount in a rack or on any surface for remote control of power in computer rooms, industrial environments, etc. Comes complete with 9' cord. RLM-20-1C
**Please note that all RM and R series modules require USC-6R controller, or any controller that provides remote 12volt DC control for operation. UL Standard #5 multi-outlet assemblies, UL File #: E221245
 #96-959
J Series Jumpers
J series jumpers connect power modules, providing AC power to all modules on the same circuit.
Pre-terminated jumpers feature convenient genderless 30 amp connectors at both ends and are sold in packs of six.		  
Part #
Jumper Length
Termination
Qty
J-12X6
12"
connector on each end
sold in packs of 6
J-24X6
24"
connector on each end
sold in packs of 6
J-72X6
72"
connector on each end
sold in packs of 6
* UL file #E221245
J-12X6
Master / Slave Jumper for Power Modules
Allows M Series slave modules to be switched remotely by an RLM, RM or R Series Master Module.  
Part #
Jumper Length
Qty
JMS-12X6
12"
sold in packs of 6
T Series Tails
T series tails connect incoming power to a single circuit within a raceway. One tail required per circuit. Each tail features a pre-terminated 30 amp connector that plugs in to a module at one end, and wire tails for J-box
connection on the other. Sold in packs of six.		  
Part #
Jumper Length
Termination
Qty
T-24X6
24"
connector on one end, tails on the other
sold in packs of 6
T-80X6
80"
connector on one end, tails on the other
sold in packs of 6
* UL file #E221245
T-24X6

FC Series Thermostatic Fan Control
Allows fans to operate at speeds proportional to temperature inside of enclosure. With a user-definable temperature range, Fan Control is available as a stand-alone or MPR Raceway mounted module. Allows control of up to 4 120 volt fans.

FC-4

FC-4-1C
Stand-alone Part #
Part #
Amperage
Control
 Status
FC-4-1C
FC-4
15
off, on, AUTO
 LED